Regulator Sizing Tools  /  Relief Valves

Relief Valve Sizing Tool

Sizes USG Models 257-S, 250-DW and 250-S relief valves for full-capacity relief, including the back pressure from the vent stack, and selects the spring or weights for your set pressure.

Note: the maximum blowing pressure is the pressure at the relief valve inlet. It is the system’s maximum safe limit minus the pressure loss in the branch piping between the main and the relief valve.

📋 Inputs

Flow & Pressures

This is the fail-open capacity of the regulators: the flow through them wide open at maximum inlet pressure.

Vent Stack

Equivalent feet of stack piping


⬆️  Fill in the inputs above and click Run Sizing.